Show Radius-Servers - Planet WGSD-1022 User Manual

Console (config)# radius-server deadtime 10

5.18.7 show radius-servers

The show radius-servers user EXEC command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the RADIUS server settings.
Console# show radius-servers
Port
IP address Auth Acct
--------------- -------- -------
172.16.1.1 1645 1646
172.16.1.2 1645 1646
OOB RADIUS servers
Port
IP address Auth Acct
---------------- ------- --------
176.16.8.9 1645 1646
Global values
-------------------
TimeOut: 3
Retransmit: 3
Deadtime: 0
Source IP: 172.16.8.1
TimeOut Retransmit
-------------- ----------------
Global Global
11 8
TimeOut Retransmit
-------------- ------------------
Global Global
User's Manual of WGSD-1022/WGSD-8000
Deadtime Source IP
--------------- --------------- ---------- ---------
Global Global
Global Global
Deadtime Source IP Priority
------------- --------------- -----------
Global Global
- 273 –
Priority Usage
1 All
2 All
1