5.4.14 show bridge address-table static
The show bridge address-table static privileged EXEC command displays statically created entries in the bridge-forwarding
database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan
mac address
------
--------------------
1
1
200
5.4.15 show bridge address-table count
The show bridge address-table count privileged EXEC command displays the number of addresses present in all VLANs or
at a specific VLAN.
Syntax
show bridge address-table count [vlan vlan]
vlan — Specific VLAN.
0060.704C.73FF
0060.708C.73FF
0010.0D48.37FF
User's Manual of WGSD-1022/WGSD-8000
port
type
------
-------
e8
permanent
e8
delete-on-timeout
e8
delete-on-reset
- 179 –