Planet WGSD-1022 User Manual page 86

• Action on Violation
Where indicates the action to be applied to packets arriving on a locked port. The
possible field values are:
• Enable Trap
This enables traps when a packet is received on a locked port.
• Trap Frequency
Which the amount of time (in seconds) between traps.
The default value is 10 seconds
In order to change the Learning Mode, the Lock Interface must be set to unlocked. Once the mode is
Note
: changed, the Lock Interface can be reinstated.
• Discard, which discards packets from any unlearned source. This is the
default value.
• Forward Normal, forwards packets from an unknown source without learning
the MAC address.
• Discard Disable, which discards packets from any unlearned source and
shuts down the port. The port remains shut down until reactivated, or until the
device is reset.
- 86 –
User's Manual of WGSD-1022/WGSD-8000