Show Sessions - Planet WGSD-1022 User Manual

Example
The following example displays information about the active users.
Console# show users
Username
----------------
Bob
John
Robert

5.23.8 show sessions

The show sessions command in EXEC mode lists the open Telnet sessions.
Syntax
show sessions
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following table describes the significant fields shown in the display:
Console> show sessions
Connection Host
---------------- -------------
1 Remote router
2 172.16.1.2
Field Description
Connection Connection number
Host Remote host to which the device is connected through a Telnet session.
Protocol
------------
Serial
SSH
HTTP
Address
-------------
172.16.1.1
172.16.1.2
- 322 –
User's Manual of WGSD-1022/WGSD-8000
Location
------------
172.16.0.1
172.16.0.8
Port Byte
-------- -------
23 89
23 8