Show Bridge Address-Table - Planet WGSD-1022 User Manual

Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1.
console (config)# interface ethernet g1
console (config-if)# port security routed secure-address 66:66:66:66:66:66

5.4.13 show bridge address-table

The show bridge address-table privileged EXEC command displays all entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
Interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan mac address
----- -------------------
1 0060.704C.73FF
1 0060.708C.73FF
200 0010.0D48.37FF
User's Manual of WGSD-1022/WGSD-8000
port type
------ --------
e8 dynamic
e8 dynamic
e8 static
- 178 –