Vlan To Ports - Planet WGSD-1022 User Manual

The page contains the following fields:
• VLAN
• Access
• Trunk
• General
• Tagged
• Untagged
• Forbidden
• Exclude

4.4.4 VLAN to Ports

The VLAN to Ports screen (see figure 4-13) contains fields for configuring VLANs to a port. This screen displays these parts,
such as:
Figure 4-12 Ports to VLAN screen
Where means the VLAN number
Indicates the port belongs to a single untagged VLAN. When a port is in Access
mode, the packet types which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled/disabled on an access port.
Which indicates the port belongs to VLANs in which all ports are tagged, except for
one port that can be untagged
Which indicates the port belongs to VLANs, and each VLAN is user-defined as
tagged or untagged (full 802.1Q mode)
Defines the interface as a tagged member of a VLAN. All packets forwarded by the
interface are tagged. The packets contain VLAN information
Packets forwarded by the interface are untagged
Forbidden ports are not included in the VLAN
Excludes the interface from the VLAN. However, the interface can be added to the
VLAN through GVRP
User's Manual of WGSD-1022/WGSD-8000
- 47 –