Planet WGSD-1022 User Manual page 39

• Description
Where can be entered by clicking on the Detail button
• Port Type
This is the port type
• Admin Status
The port can be taken offline by selecting the Down option.
When Up is selected, the port can be accessed normally.
• Current Port Status The current status of the port is displayed here
• Reactivate
If you want to reactivate a port that has been suspended, click the checkbox
Suspended Port
• Operational Status
This indicates whether or not the port is active
• Admin Speed
Change the speed of the port here
• Current Port Speed The current speed of the port is displayed here
• Admin Duplex
Change the duplex mode here
• Current Duplex
Tthis is the duplex mode of the port
Mode
• Auto Negotiation
You can enable or disable the port's Auto Negotiation feature. If using an SFP
module, Auto Negotiation for the specific port should be set to disable
• Current Auto
This is the current setting of the port's Auto Negotiation feature
Negotiation
• Admin
Specifies the capabilities to be advertised by the port. Multiple options may be
selected or Max Capability can be selected to cover all of the options.
Advertisement
The available options are:
• Current
The port advertises its capabilities to its neighbor port to begin the negotiation
process. This field displays the current advertisement settings.
Advertisement
• Neighbor
Tthe neighbor port (the port to which the selected interface is connected) advertises
its capabilities to the port to start the negotiation process. This field displays the
Advertisement
neighbor's current settings
• Back Pressure
The Back Pressure feature of the selected port can be enabled or disabled
• Current Back
Displays whether Back Pressure is enabled or disabled on the currently selected
port
Pressure
Max Capability, which indicates that the port speeds and duplex mode settings
can be accepted.
10 Half, indicates that the port is advertising a 10Mbps half duplex mode setting.
10 Full, indicates that the port is advertising a 10Mbps full duplex mode setting.
100 Half, indicates that the port is advertising a 100Mbps half duplex mode
setting.
100 Full, indicates that the port is advertising a 100Mbps full duplex mode
setting.
1000 Full, indicates that the port is advertising a 1000Mbps full duplex mode
setting
- 39 –
User's Manual of WGSD-1022/WGSD-8000