Planet WGSD-1022 User Manual page 140

the Dynamic MAC Address table. The Dynamic MAC Address table contains address parameters by which packets are directly
forwarded to the ports. The Dynamic Address Table can be sorted by interface, VLAN, and MAC Address.
The page contains the following fields:
• Address Aging
• Clear Table
Query
• Port
• MAC Address
• VLAN ID
• Address Table Sort
Key
Figure 4-70 Dynamic Address screen
Specifies the amount of time (in seconds) the MAC addresses
remains in the Dynamic MAC Address table before it times out, if no
traffic from the source is detected.
The default value is 300 seconds.
If checked, clears the MAC address table
Specifies the interface for which the table is queried. There are two
interface types from which to select:
• Port - displays the specific port number
• LAG - displays the specific LAG number.
Specifies the MAC address for which the table is queried
Specifies the VLAN ID for which the table is queried.
Specifies the means by which the Dynamic MAC Address table is
sorted by address, VLAN, or interface.
- 140 –
User's Manual of WGSD-1022/WGSD-8000