Planet WGSD-1022 User Manual page 261

vlan vlan-id — VLAN number.
port-channel number — Port-channel.
buffers — Displays buffer setting for the interface queues. For gigabit Ethernet interfaces, the queue depth for each of
the 8 queues and the thresholds for the WRED/Tail Drop are displayed. For 10/100 interfaces the minimum reserved
settings are displayed.
queuing — Displays the queue strategy (WRR or EF), the weight for WRR queues, the CoS to queue map and the EF
priority.
shapers — Displays the specified interface shaper and the shaper for the queue on the specified interface.
policers — Displays all the policers configured for this interface, their setting, and the number of policers currently
unused.
Default Configuration
For VLAN interface only the policers option is relevant.
If no keyword is specified with the show qos interface command, the port QoS mode, default CoS value, DSCPto-
DSCP-mutation map (if any) attached to the port, and policy map (if any) attached to the interface are displayed. If a specific
interface is not specified, the information for all interfaces is displayed.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays output from the show qos interface ethernet e1 buffers command.
Console# show qos interface ethernet e1 buffers
Ethernet e1
Notify Q depth:
qid Size
1 125
2 125
3 125
4 125
5 125
6 125
7 125
8 125
qid
1
2
3
4
5
6
7
8
User's Manual of WGSD-1022/WGSD-8000
Threshold
100
100
100
100
N/A
N/A
N/A
N/A
- 261 –