Show Qos - Planet WGSD-1022 User Manual

Use the no form of this command to disable the QoS features on the device.
Syntax
qos [advanced]
no qos
advanced — QoS advanced mode, which enables the full range of QoS configuration.
Default Configuration
By default QoS is enabled in basic mode.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command. However, switching to Basic qos mode sets the trust mode to cos.
Example
The following example shows how QoS is enabled on the device, in basic mode.
Console (config)# qos

5.17.2 show qos

The show qos user EXEC command displays the QoS status.
Syntax
show qos
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a device where basic mode is supported.
Console# show qos
Qos: basic
Basic trust: dscp
User's Manual of WGSD-1022/WGSD-8000
- 257 –