Ssh And Slogin Commands; Ip Ssh Port - Planet WGSD-1022 User Manual

Interface Port ID
Name Prio. Nbr
------------- --------------
g1 128.1
g2 128.2
ch1 128.65
The following example displays spanning-tree information for port g1.
Console# show spanning-tree ethernet g1
Interface Port ID
Name Prio. Nbr
------------- --------------
g1 128.1
Spanning tree enabled
Type: point-to-point (configured: auto)
Port Fast: no (configured: no)
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638

5.22 SSH and SLOGIN Commands

5.22.1 ip ssh port

The ip ssh port global configuration command specifies the port to be used by the SSH server. To use the default port, use the
no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
port-number — Port number for use by the SSH server (Range: 1 - 65535).
hello 2, max age 20, forward delay 15
Cost Set
Cost Bridge ID
--------- ------ -----------------------
19 FWD
19 FWD
19 FWD
Cost Set
--------- ------ -----------------------
19 FWD
Designated
38 32768 0030.9441.62c1
57 32769 0002.4b29.7a00
57 32769 0002.4b29.7a00
Designated
Cost Bridge ID
38 32768 0030.9441.62c1
- 305 –
User's Manual of WGSD-1022/WGSD-8000
Port ID
Prio. Nbr
---------------
128.25
128.25
128.65
Port ID
Prio. Nbr
---------------
128.25