Planet WGSD-1022 User Manual page 117

• Interface Priority
• Path Cost
• Designated Bridge
ID
• Designated Port ID
• Designated Cost
• Forward Transitions This indicates the number of times the port has changed from the Forwarding state
• Remaining Hops
MSTP Interface status table
The page displays the current MST Interfaces configuration and status.
interface.
• Backup, provides a backup path to the designated port path toward the
Spanning Tree leaves. Backup ports occur only when two ports are connected
in a loop by a point-to-point link. Backup ports also occur when a LAN has two
or more connections connected to a shared segment.
• Disabled, which indicates the port is not participating in the Spanning Tree.
Defines the interface priority for specified instance.
The default value is 128.
Indicates the port contribution to the Spanning Tree instance. The range should
always be 1200,000,000.
Where indicates that the bridge ID number that connects the link or shared LAN to
the root.
By which indicates that the Port ID number on the designated bridge that connects
the link or the shared LAN to the root.
Indicates that the default path cost is assigned according to the method selected on
the Spanning Tree Global Settings screen.
to Blocking state.
Indicates the hops remaining to the next destination.
Figure 4-54 MSTP Interfance configuration screen
- 117 –
User's Manual of WGSD-1022/WGSD-8000