Server Logs - Planet WGSD-1022 User Manual

4.12.11 Server Logs

The Global Log Parameters page contains fields for enabling logs globally, and fields for defining log parameters. The Severity
log messages are listed from the highest severity to the lowest.
Event messages have a unique format, as per the SYSLOG RFC recommended message format for all error reporting. For
example, Syslog+ local device reporting. Messages are assigned a severity code, and include a message mnemonic, which
identifies the source application generating the message. Messages are filtered based on their urgency or relevancy. The
severity of each message determines the set of event logging devices to which are sent for each event logging device. The
following table contains the Log Severity Levels:
Severity Type
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
The Server Logs screen (see figure 4-80) contains information for viewing and configuring the Remote Log Servers. New log
servers can be defined, and the log severity sent to each server.
Severity Description
Level
0 The system is not functioning.
1 The system needs immediate
attention.
2 The system is in a critical state.
3 A system error has occurred.
4 A system warning has occurred.
5 The system is functioning properly,
but system notice has occurred.
6 Provides device information.
7 Provides detailed information about
the log. If a Debug error occurs,
contact Dell Online Technical Support
User's Manual of WGSD-1022/WGSD-8000
Example
Memories overflow.
Main system memory
pool overflow.
Cannot bind to SNMP.
Failed to delete entry.
Port down.
Bad route.
Link up.
Method list created.
- 149 –