Network Settings - Planet WGSD-1022 User Manual

• DNS Servers
• Default Gateway
• Address Mode
• Base MAC Address
System Information
• Serial Number
• Model Name
• Hardware Version
• Boot Version
• Firmware Version
• System Location
• System Contact
• System Up Time
• Current Time

4.2.2 Network Settings

The Basic Setup Table include the Network Settings (see figure 4-3), which allows you to assign DHCP or static IP settings to
interfaces and assign default gateways.
In the Networking Setting screen, you can set these parts as below:
Display the current DNS Servers, no matter by manual setting or assigned by
the DHCP server
Display the current default gateway setting
Show the IP Address mode of the system – By Static or Dynamic (DHCP)
The MAC address of the Switch displays here
The unique box serial number for this switch
The product name of this switch
The release version maintenance number of the hardware
The version of boot system currently running on the switch
The operating system currently running on the switch
Display where the Switch is located
Display the administrative contact person
The time in days, hours and minutes since the last switch reboot
Specifies the time and date. The format is hour, minute, second, month, day,
year
- 32 –
User's Manual of WGSD-1022/WGSD-8000