Planet WGSD-1022 User Manual page 56

• larm Entry
Indicates a specific alarm
• Source Interface
Displays the interface for which RMON statistics are displayed. The possible field
values are:
• Counter Name
Displays the selected MIB variable
• Sample Type
Defines the sampling method for the selected variable and comparing the value
against the thresholds. The possible field values are:
• Absolute, compares the values directly with the thresholds at the end of the
• Delta, subtracts the last sampled value from the current value. The difference in
• Rising Threshold
Displays the rising counter value that triggers the rising threshold alarm. The rising
threshold is presented on top of the graph bars. Each monitored variable is
designated a color
• Rising Event
Displays the mechanism in which the alarms are reported. The possible field values
are:
• Falling Threshold
Displays the falling counter value that triggers the falling threshold alarm. The
falling threshold is graphically presented on top of the graph bars. Each monitored
variable is designated a color.
• Falling Event
Displays the mechanism in which the alarms are reported. The possible field values
are:
• Startup Alarm
Displays the trigger that activates the alarm generation. Rising is defined by
crossing the threshold from a low-value threshold to a higher-value threshold
• Port, displays the selected port of the RMON statistics.
• LAG, displays the RMON statistics for the selected LAG.
sampling interval.
the values is compared to the threshold.
• LOG. Indicates there is not a saving mechanism for either the device or in the
management system. If the device is not reset, the entry remains in the Log
Table.
• TRAP, indicates that an SNMP trap is generated, and sent via the Trap
mechanism. The Trap can also be saved using the Trap mechanism.
• Both, indicates that both the Log and Trap mechanism are used to report
alarms.
• LOG, indicates there is not a saving mechanism for either the device or in the
management system. If the device is not reset, the entry remains in the Log
Table.
• TRAP, indicates that a SNMP trap is generated, and sent via the Trap
mechanism. The Trap can also be saved using the Trap mechanism.
• Both, indicates that both the Log and Trap mechanism are used to report
alarms.
- 56 –
User's Manual of WGSD-1022/WGSD-8000