Planet WGSD-1022 User Manual page 48

The page contains the following fields:
• Port
• Mode
• Join VLAN
• VLANs
• LAG
Press the " " button to selecet and add VLAN to per port. The screen in Figure 4-14 appears.
Join VLAN
Figure 4-13 VLA N to Ports
Displays the interface number
By which indicates the port to VLAN mode. Possible field values are:
• General - By which indicates the port belongs to VLANs, and each VLAN is
user-defined as tagged or untagged (full 802.1Q mode).
• Access - Indicates the port belongs to a single untagged VLAN. When a port is
in Access mode, the packet types which are accepted on the port cannot be
designated. Ingress filtering cannot be enabled/disabled on an access port.
• Trunk - Which indicates these ports belong to VLANs in which all ports are
tagged, except for one port that can be untagged.
Defines the VLANs to which the interface is joined.
Displays the PVID tag
Indicates whether the port is a member of a LAG. If it is a member of a LAG, it
cannot be configured to a VLAN. The LAG to which belongs can be configured to a
VLAN
User's Manual of WGSD-1022/WGSD-8000
- 48 –