Mix Minus Outputs; Assigning A Mix Minus Output; Removing A Mix Minus Output - Calrec SUMMA User Manual

MIX MINUS OUTPUTS

Mix minus outputs are path- specific desk outputs, which are available for patching. Summa has a pool of 188
resources which can be assigned to be mix minus outputs or direct outputs.
Mix minus outputs are used to create foldback feeds using a comprehensive contribution system for defining the paths or
buses that feed the output. See
system, including a list of all mix minus controls.

Assigning a Mix Minus Output

To assign a mix minus output:
1. In 'active Show' view, tap the mix minus output routing tab.
2. Tap MONO or STEREO to select the mix minus output width that you wish to create for the currently accessed
path.
If not enough resources are available for the desired output, you can remove other direct/mix minus outputs to free-up
resources. Note, at the bottom of the pop-up the number of remaining resources is displayed.

Removing a Mix Minus Output

To remove a mix minus output:
1. Choose NO PATH from the path width drop-down menu in the mix minus control window header.
2. A pop-up will appear asking you to confirm the removal of the mix minus output. Tap either REMOVE OUTPUT
or CANCEL .
CALREC
Putting Sound in the Picture
"Mix Minus" on page 155 for detailed information on how to set up and use the mix minus
99