Loading A Preset; Backing Up And Restoring Presets; To Restore A Preset From An External Drive; Editing A Preset - Calrec SUMMA User Manual

Loading a Preset

To load a preset to the currently accessed path:
1. Tap PATH PRESETS in the Access bar.
2. Navigate to and select the preset that you wish to use.
3. Tap LOAD .
If you load a preset to a path which is part of the
the control link. Any elements of the preset which don't apply to the path will be automatically ignored.

Backing Up and Restoring Presets

Presets can be backed up to a USB drive connected to one of Summa's USB ports.
To back up a preset:
1. Tap PRESETS in the Access bar.
2. Navigate to and select the preset that you wish to backup from the list.
3. Tap BACKUP. You can now select multiple Presets from the same location if required.
4. Tap SELECT BACKUP LOCATION and ensure your USB drive is connected to one of Summa's USB ports.
5. Navigate to your desired backup location, creating a new folder if necessary
6. Press BACKUP HERE or CANCEL. If you have previously saved a version of the same preset, a pop-up will appear
to ask if you wish to OVERWRITE or CANCEL the backup.
FIGURE 3 - BACKUP PRESETS

To restore a Preset from an external drive:

1. Press RESTORE and navigate to select the Preset that you wish to restore to the internal memory.
2. Press RESTORE or CANCEL.

Editing a Preset

Once a preset has been created you can edit its scope, label and description at any time by tapping PRESETS in the
Access bar, selecting the from the pop-up and tapping EDIT .
CALREC
Putting Sound in the Picture
control link, the in-scope preset elements will be loaded for all paths in
47