Memories; Loading A User Memory; Creating A New User Memory; Updating A User Memory - Calrec SUMMA User Manual

MEMORIES

User memories are files which store processing, routing and patching information which can be recalled at any
time.

Loading a User Memory

1. Tap MEMORIES in the Show menu and you will see a list of all user memories that are available within the
current Show.
2. Tap to select the user memory that you wish to use and tap LOAD .
3. The footer changes to ask for confirmation, tap LOAD SELECTED or CANCEL.

Creating a new User Memory

To create a new user memory with current surface settings:
1. Tap NEW in the memories window footer.
2. Enter a name and a short description for the new user memory.
3. Tap CREATE or CANCEL .

Updating a User Memory

To update a previously saved user memory with the current surface settings:
1. Select the user memory that you wish to update and tap UPDATE in the memories window footer.
2. You will be prompted to confirm by tapping either UPDATE SELECTED, or CANCEL.

Creating Multiple User Memories

Best practice is to create one 'default' user memory, test it, make any necessary changes, and then use this as the
basis for all other user memories within the Show. This speeds up the process by reducing the need to make the same
changes to many different user memories.
To do this, create, test and update what is to be the 'default' user memory as described above, then, with the this user
memory still loaded on the surface, tap NEW, and the information will be saved into a new user memory, effectively
duplicating it.

Storage Capacity

There is a capacity indicator at the top of the memories window which shows how much storage space is available.
If you require more space, delete any old Shows and user memories which are no longer needed. The capacity indicator
shows the amount of space available on the controller card for storing Shows and Memories, however, the controller card
memory is also used for other files and folders and so the capacity may vary.
70 SUMMA
Networked Audio Production System
SETTING UP