5.1 Surround Paths; Vca Group Protection - Calrec SUMMA User Manual

FIGURE 3 - NULLING INDICATORS

5.1 Surround Paths

If a surround path is part of a VCA group, the primary and secondary masters' level, PFL, AFL and CUT settings will affect
all legs of the surround path. A surround path leg cannot be a VCA master or slave.

VCA Group Protection

VCA groups can be protected from being changed:
1. Tap SHOW SETTINGS at the bottom of the Show menu.
2. Select GENERAL from the left hand menu.
3. Switch VCA EDITING USING ACCESS BUTTONS 'off'—all existing VCA groups carry on operating normally but
no changes can be made and no new groups can be created.
FIGURE 4 - VCA GROUP SETTINGS
CALREC
Putting Sound in the Picture
143