Attaching A Path To A Fader; Settings - Calrec SUMMA User Manual

Attaching a Path to a Fader

To attach a path to a single fader:
1. Tap an empty fader space to select it.
2. Tap NEW in the control window footer.
3. A pop-up opens to show all path options, ranging from different widths of channel to mains, groups, auxs and
tracks. Tap to select the desired width/type and the pop-up closes, or tap CANCEL to return to the fader layout
screen without making any changes.
To attach paths to multiple faders:
1. Either hold and drag or tap and drag selection handles to select the desired range of faders.
2. Tap NEW and select your path/width choice from the pop-up. All selected faders will then be populated with the
chosen path type/width. If a main, group, aux or track is chosen, the selected faders will be populated with buses
in consecutive order. For example, if you select four faders, and then choose aux master 4, the faders will be
populated with aux masters 4, 5, 6 and 7.
FIGURE 2 - FADER LAYOUT — NEW PATH POP-UP

Settings

Tap SETTINGS in the bottom right of the fader layout window and a pop-up appears containing settings for controlling
how information is displayed. The top half allows you to set how fader/port labels are displayed. Tap to select which of
the three label types you would prefer to view. Your choice of label type will then be displayed if possible, if not, the next
type in the priority order will be displayed, and so on.
The bottom half of the pop-up, 'surface interaction', provides two check box options:
SCREEN FOLLOWS LAYER SELECTION allows the screen to scroll, bringing the selected layer into focus.
•
• SCREEN SELECTION FOLLOWS FADER ACCESS allows the screen to scroll to bring the currently
accessed fader into focus.
CALREC
Putting Sound in the Picture
77