FIGURE 1 - AUTOMIXER PATH CONTROLS
AutoMixer Global Controls
Each of Summa's four AutoMixers have their own attack, release and bypass controls. Attack and release are used to
smooth out the signals prior to the level ratio calculation being made. A compromise must be made between fast attack
and release, which leads to a more erratic but fast-acting functioning and slow attack and release times, which leads to
a slower acting but smoother functioning.
Tapping BYPASS disables the AutoMixer for all assigned paths. If you want to momentarily take a path out of the
AutoMixer assignment, the APPLY AUTOMIXER TO CURRENT PATH switches should be used on the individual
path's processing tabs, as shown above.
FIGURE 2 - AUTOMIXER GLOBAL CONTROLS
CALREC
Putting Sound in the Picture
129