Calrec SUMMA User Manual page 160

Once the mix minus output has been created you have the option to set different feeds depending on whether the
channel/group fader is open or closed.
Tap to select WHEN FADER OPEN and the mix minus output feed pop-up appears. Within the pop-up, select one of
the following feed options:
• Nothing
• Auto minus
• Any of the 16 auxs
• Any of the 32 tracks.
Next, tap the contribution button to the right. This brings up the contribution pop-up which replicates the fader setup
screen, allowing you to route any path to the contributing bus. For example, if you selected aux 3 to feed the mix minus
output, selecting any path from the contribution window immediately routes that path to aux 3.
The path for which the mix minus was created can easily be identified within the contribution
screen as it displays the 'receiver' tab.
It is important to be sure of any changes you make within the contribution pop-up as you can directly change
routing for all paths.
160 SUMMA
Networked Audio Production System
COMMUNICATIONS