Bus Outputs; Path Outputs; Console Outputs - Calrec SUMMA User Manual

Output Listen
The output listen bus is used in a similar way to AFL although signals are routed to the output listen bus post output delay.
Bus outputs can be routed to the output listen bus.
See "PFL, AFL and Output Listen" on page 111

Bus Outputs

Mains
• Multiple paths can be routed to mains. Mains can be routed to other mains.
• Mains are primarily used to feed transmission and/or recording devices.
• Mains are available for patching.
Tracks
• Multiple paths can be routed to tracks to create mixes.
• Each channel has one global send level control for all tracks sends.
• Tracks can be used in conjunction with mix minus outputs to create interruptable foldback feeds.
• Tracks cannot be routed to any other bus or output.
• Tracks are available for patching.
Aux Outputs
• Multiple mixes can be created by routing paths to auxs.
• Each channel has individual send level and position controls for each of the 16 Aux outputs.
• Auxs can be used in conjunction with mix minus outputs to create interruptable foldback feeds.
• Auxs can be controlled by logic functions to cut the pre fader send to each individual Aux, for controlling foldback
feeds in on/off air situations.
• Auxs cannot be routed to any other bus/output.
• Auxs are available for patching.

Path Outputs

Mix Minus Outputs
• Each channel can have one mix minus output assigned to it, from a pool of 188 mono legs (shared with direct
outputs), providing an easy way to create a mix for a contributor using any track or aux, or the dedicated auto minus
bus. See "Mix Minus" on page 155
Direct Outputs
• Each channel can have one direct output assigned to it from a pool of 188 mono legs (shared with mix minus outputs)
to make signals available for patching. Direct outputs can be pre EQ, pre fader or post fader.

Console Outputs

Monitor Outputs
• Each monitor output is available for patching to any I/O box output port which can, in turn, be connected to a
loudspeaker.
• Monitor source controls are available from the touch display footer when in 'active Show' view allowing you
to quickly change monitor sources.
• Summa has several monitor outputs available. For more detailed information see
36 SUMMA
Networked Audio Production System
for more information.
for more information.
"Monitoring" on page 105
.
SYSTEM OVERVIEW