Tone And Oscillator; Routing Tone To A Channel; Routing Tone To Buses - Calrec SUMMA User Manual

TONE AND OSCILLATOR

Summa provides many ways to inject tone within the system to help with path-checking and line-up.

Routing Tone to a Channel

1. Press the fader ACCESS button for the channel to which you wish to inject tone.
2. Tap the input processing tab.
3. Tap TONE in the input control window header.
It is easy to see if tone has been routed to a channel input as a note appears in the input window as shown below:
FIGURE 1 - TONE TO CHANNEL INDICATOR

Routing Tone to Buses

1. Tap BUSES & OUTPUTS in the Show menu.
2. Select the group/track/aux/main tab depending on which bus/output type you wish to route tone to.
3. Tap TONE for the chosen bus/output. (tone is routed to main 1 in the image below).
FIGURE 2 - ROUTING TONE TO A BUS OR OUTPUT
CALREC
Putting Sound in the Picture
101