Input Control Mode - Calrec SUMMA User Manual

FIGURE 1 - INPUT CONTROLS

Input Control Mode

Push the INPUT control mode button on the surface to populate each pair of control cells with input controls for the
fader below. The top control cell is for controlling input trim and the button switches between input 1 and 2. The bottom
control cell controls input balance for stereo paths, the button toggles through the various path leg routing options.
The balance control is only operational with both path leg routing options either on (mono) or off (stereo).
FIGURE 2 - CONTROL CELLS—INPUT CONTROL MODE
CALREC
Putting Sound in the Picture
87