Connecting Monitors - Calrec SUMMA User Manual

CONNECTING MONITORS

No audio is passed through the Summa surface for processing, therefore, loudspeakers must be connected to the
system via Hydra2 I/O ports and patched from Summa's various monitor outputs.
All Summa's monitor outputs are available as sources within the I/O patching screen from where they can be patched to
I/O box output ports and then connected to loudspeakers.
Once loudspeakers have been connected and correctly patched, all monitoring control is achieved from the surface
monitor controls, as described in
display. The figures below show an example of how loudspeakers can be connected and arranged along with an image
showing how the I/O patching screen should look for this loudspeaker setup.
FIGURE 1 - MONITORING PATCHING EXAMPLE
106 SUMMA
Networked Audio Production System
"Control Surface Sections" on page 23 , or the monitor bar at the bottom of the touch
MONITORING