Mic/Gain; Group Input Controls; Linking Input 1 And Input 2 Trims - Calrec SUMMA User Manual

Mic/Gain

If the gain of any connected mic/line input is not the same on all legs of a stereo or surround channel, then the gain dis-
play will show the highest and lowest value for surround sources, left and right values for stereo sources , as highlighted
below:
FIGURE 3 - MIC/GAIN

Group Input Controls

When a stereo or mono group is accessed an input trim control is available from the input window as shown below.
Path leg routing buttons are also provided for stereo groups:
FIGURE 4 - GROUP INPUT CONTROLS

Linking Input 1 and Input 2 Trims

Inputs 1 and 2 have separate input trim controls . These can be linked from the Tools menu on the Access> Input screen
as shown in Figure 5 below. The wording on the Control Cell changes to show the words 'Trims Linked' between the
Input 1 and Input 2 source identifiers. The display on the screen also shows the fact that the Input trims are linked.
88 SUMMA
Networked Audio Production System
GETTING SIGNALS IN AND OUT