User Meters
User meters 1-4 provide metering for paths which the user wishes to display. The 4 user meters are placed on the meter
bridge as part of the configurable meter layout. Any bus output can be chosen as a user meter source. User meter
sources can be selected quickly using the meter selector buttons to the bottom right of the touch display when in 'active
Show' view for each of the 4 user meters. The image below shows the user meter 1 selection pop-up, which follows a
similar structure to the monitor pop-up, with a source select tab, an external inputs tab and a settings tab. The sources
tab is shown here.
FIGURE 6 - USER METER SELECTION POP-UP
Meter Position in Audio Chain
The Metering point may now be placed at the Input, Pre EQ, Post EQ, Pre Fader, Post Fader or Post which is the last
point in the Audio Path. This is accessed from the Meter & PFL button in the Screen Header. These Selections can be
made per path, or applied easily to all Paths See Figure 7 below.
FIGURE 7 - METER POSITION SELECTOR
120 SUMMA
Networked Audio Production System
METERING