Icons; Channel Settings; Layer View; Surface Interaction - Calrec SUMMA User Manual

Icons

The following icons can be displayed in the I/O patching window:
This symbol will be displayed if you have been denied access to the port via H2O by the network
administrator.
Whenever a port goes offline this icon is displayed.
If a port has been patched to/from by another Hydra2 user this icon is displayed.
If a port has been patched to/from via H2O this icon will be displayed.
If a port has been patched via a 3rd party controller this icon will be displayed.
Within the I/O patching window, sources and destinations have separate settings, which are accessible from the
left and right of the control window footer. The available settings vary depending on which port type is in view:

Channel Settings

If channel inputs are in view, you can globally switch between viewing input 1 or input 2.

Layer View

When viewing fader specific paths, such as channel inputs or fader inserts, layer view options will be available.
Select layers 1–6 to view only faders on that layer, or select SURFACE LAYER to view the layer which is currently
active on the surface.

Surface Interaction

When viewing fader specific paths, such as channel inputs or fader inserts, surface interaction options are available.
Checking the FADER SELECTION FOLLOWS FADER ACCESS check box brings the currently accessed fader
directly into view within the I/O patching screen at all times.

Connected Destination

You can view connected destinations from sources and view connected sources from destinations. Both are displayed
within the centre columns with this option selected.

Information Display

When viewing Hydra patchbays or I/O boxes, the information display split-selection button is available to choose
between viewing path descriptions or connected source/destinations within the two centre columns of the screen.
CALREC
Putting Sound in the Picture
83