Access Follows Link - Calrec SUMMA User Manual

Access Follows Link

Active Show>Show Settings>General now contains an option for path access to follow the creation of a control link see
Figure 2 Below.
FIGURE 2- ACCESS FOLLOWS LINK OPTION
When this option is on, then when the user creates a link across a range of faders by simultaneously pressing two link
buttons, the left-most path in the link will be accessed. Using this option eliminates the worry about accessing the right
path after the link is created.
The user can now also link faders that do not contain paths. This makes it very quick to select a range of faders and
assign paths from the Access screen.
CALREC
Putting Sound in the Picture
133