Downmix Defaults; Offsets - Calrec SUMMA User Manual

Downmix Defaults

Every Show has default downmix settings which can be located by tapping SHOW SETTINGS at the bottom of the
Show menu on the touch display and then selecting 'downmix defaults' from the menu.
These defaults can be edited by tapping the individual text fields and entering new values. All new and existing paths
will be updated to the new level settings but any offsets which were previously specified for existing paths will be retained.

Offsets

A level offset can be specified for all paths that are routed to monitors and meters (except APFL) which allows you to
increase the level of 5.1 sources for monitoring purposes without having an effect on your mix. A separate offset can
be specified for APFL levels.
FIGURE 2 - DOWNMIX DEFAULTS
170 SUMMA
Networked Audio Production System
ROUTING