Vca Groups; Creating And Dissolving Vca Groups - Calrec SUMMA User Manual

VCA GROUPS

Summa's VCA group system allows you to control the level, CUT, AFL and PFL statuses of a group of faders from a
'master' fader.

Creating and dissolving VCA Groups

To create a VCA group:
1. Select the fader that you wish to be the group's master by pushing and holding its ACCESS button.
2. Push ACCESS for the faders that you wish to be slaves to the master.
To remove slaves or undo the process:
1. Push and hold the master's ACCESS button.
2. Push the ACCESS buttons for the slaves that you wish to remove from the group.
By default, slave faders move along with their master faders to show the relative levels. This feature can be switched off
within Summa's general settings, as shown at the bottom of this page.
140 SUMMA
Networked Audio Production System
PROCESSING