System Status Monitoring; Notifications - Calrec SUMMA User Manual

SYSTEM STATUS MONITORING

Summa constantly monitors the functioning of all system components and connections and reports warnings,
faults and information to you. There are three types of system status message:

Notifications

Tap the system status button to display the pop-up which lists all messages in a sortable table. Tap the table headers
to sort the messages. There are four view selection buttons along the bottom of the pop-up which allow you to filter out
messages by type, for example, if you do not want to see any messages which have already been fixed, tap to switch
off the FIXED view button. Selecting any of the messages populates the 'message description' field with a description
of the message. Note: From version 3.2 onwards, if an I/O module fails, it will generate a system status error message.
Previously, only a failure of the complete modular I/O box generated a system status error message.
FIGURE 1 - SYSTEM STATUS POP-UP
184 SUMMA
Networked Audio Production System
Error messages report a serious error message that could cause, or has caused the
system to fail. Errors normally require user intervention to correct the problem before
operation can continue.
Warning messages indicate where the system has located a fault or a failure, but will still
operate without intervention. Warnings indicate that the system should be checked as it
may be running on secondary components.
Information messages inform users when certain actions take place. They do not report
errors and no action needs to be taken in response to them.
The system status notification button is situated within the notifications area to the top right
of the touch display when in 'active Show' view. Under normal operating circumstances
the system status button will look like this.
CONSOLE FACILITIES