Insert And Width Tab Controls - Calrec SUMMA User Manual

FIGURE 2 - CONSOLE MONITOR INSERT ON/OFF TOGGLE SWITCH

Insert and Width Tab Controls

• Width: A width rotary control is available for all stereo paths and is used to control the width of the stereo width
ranging from mono, through stereo to wide. Wide creates the impression of an extended image past the usual
left/right limits. Pressing the WIDTH control mode button populates the bottom row of control cells with width
controls for any stereo paths.
• Insert: Inserts can be switched on or off individually.
• Position: Inserts can be placed either pre EQ, pre fader or post fader.
• Insert patching sources and destinations are clearly displayed.
FIGURE 3 - FADER STRIP
CALREC
Putting Sound in the Picture
139