Mix Minus Using Auxs Or Tracks; Setting Up A Mix Minus Output; Mix Minus Controls - Calrec SUMMA User Manual

Mix Minus using Auxs or Tracks

When using an aux or track to feed a mix minus output you should make sure that the associated channel/group is
not routed to the contributing aux or track as it will not automatically be subtracted. The source channel/group is only
automatically subtracted when using the auto minus bus.

Setting up a Mix Minus output

1. Access a channel or group by pressing its ACCESS button (either above the fader or in the 'Buses & Outputs'
screen).
2. Make sure the touch display is in 'active Show' view by exiting either the shows list or System Settings area and
select ACCESS from the Show menu.
3. Select the mix minus output routing tab.
4. Create a mix minus output by tapping either MONO or STEREO.

Mix Minus Controls

• Level: Control the level of the mix minus output.
• Tone: Send tone to the mix minus output.
• Talkback: Route the talkback microphone feed to the mix minus output.
• AFL: Route the AFL of the mix minus output to the console monitors.
• When Fader Open: Tap to select a source to feed the mix minus output when the accessed path's fader is open.
• When Fader Closed or Cut: Tap to select a source to feed the mix minus output when the accessed path's fader is
closed.
FIGURE 3 - MIX MINUS OUTPUT WINDOW
CALREC
Putting Sound in the Picture
159