Replay - Calrec SUMMA User Manual

FIGURE 5 -LINK TRIMS

Replay

Replay allows the user to select a number of channels to switch between input 1 and input from one control which can
be a user button or be controlled from the screen. This is also achieved from the Tools menu on the Access>Input screen
shown in Figure 5 above. The user then selects paths for replay using the ACCESS keys. see Figure 6 below.
The fader displays change to say 'REPLAY' rather that not in replay' as appropriate.
FIGURE 6 -REPLAY CHANNEL SELECTOR
When Replay is active these channels will switch to Input 2 , when Replay is turned off the input channels switch back
to input 1. Replay makes setting up a virtual soundcheck easy. With the sources connected to input 1 each source is
sent to a recorder and its returns are connected to input 2. When the talent leaves the user can turn replay on play the
recording and continue the soundcheck. On completion the replay is turned off to switch all the inputs back to the live
sources. Note: Replay can also be controlled from a GPI if required. Figure 7 shows system in Replay.
FIGURE 7 -SYSTEM IN REPLAY
CALREC 89
Putting Sound in the Picture