Pan Controls; Surround Mains And Groups; Pan To Tracks; Pan To Auxs - Calrec SUMMA User Manual

PAN CONTROLS

The pan processing tab provides individual pan controls for each channel or group. Separate pan controls are
available for panning to mains and groups, to auxs and to tracks and you can switch between the three using the
drop-down menu in the window header.

Surround Mains and Groups

Surround panning controls are available when feeding mains and groups. There are several ways to manipulate these
controls:
• On the touch display there is a visual representation of the surround space to the left hand side of the panning screen.
Tap a new location or drag the white disk to place the audio within the space. Alternatively, there are rotary controls
on the right of the panning window available for left/right and front/back panning.
• Push the PAN control mode button to populate each pair of control cells on the surface with 'Main & Group' pan
controls for the currently accessed path. Use the top control cell to set the left right pan and the bottom control cell
to set the front back pan. The buttons switch each pan control on/off individually.
FIGURE 1 - CONTROL CELLS—PAN

Pan to Tracks

Tracks can be stereo or mono. When PAN TO: TRACKS is selected in the window header a single left/right panning
rotary is provided which sets panning for the accessed path to all stereo tracks.

Pan to Auxs

Auxs can be stereo or mono. When PAN TO: AUX is selected in the window header 16 panning rotaries are provided
for setting individual panning for each of the 16 Auxs. There are also individual ON/OFF switches to switch on and off
the panning for each Aux send.
134 SUMMA
Networked Audio Production System
PROCESSING