Ricoh FT556 Service Manual page 88

Steps 5 through 16 should also be done when
color developer is replaced.
5. Remount the toner tank onto the develop-
ment unit.
6. Making sure that the color development
unit is properly engaged with the unit
guide rail of the copier, install the color
development unit [A].
7. Install a color toner cartridge [B].
8. Remove the DIP switch cover [C] on the
left side of the operation panel (1 screw)
and turn on DIP SW5 [D].
9. Plug in the machine and turn on the main
switch. Confirm that the color toner indica-
tor is displayed on the operation panel.
10. Press the Program key. "20" should be
displayed in the Copy Counter.
11. Put five sheets of white paper (A3 or
11" x 17") on the exposure glass.
31 March 1987
1-77