Lead Edge Registration Adjustment - Ricoh FT556 Service Manual

5. LEAD EDGE REGISTRATION ADJUSTMENT

ADJUSTMENT STANDARD
1. Place a 150 mm scale [A] on the exposure
glass [B], aligning it with the left scale [C].
2. Make 3 copies.
3. Turn off the main switch.
4. Remove the DIP switch cover [D] on the
left side of the operation panel (1 screw)
and turn on DIP SW 201-8.
5. Turn on the main switch.
6. Press "4", "2", and "#" in that order.
The present lead edge registration factor
will start to blink in the Magnification indica-
tor.
3-30
"L-10": 0 ± 2 mm
(0 ± 0.08")