Ricoh FT556 Service Manual page 34

20. Disconnect the white 7P connector from:
CN908 (3rd paper feed PCB [A]) or
CN956 (paper bank PCB [B]).
21. Connect the tray harness to the expansion
unit or the paper bank as follows:
4P connector to:
CN911 (3rd paper feed PCB)
or
CN958 (paper bank PCB)
7P connector to:
CN908 (3rd paper feed PCB)
or
CN956 (paper bank PCB)
3P connector to:
CN909 (3rd paper feed PCB)
or
CN957 (paper bank PCB)
5th Feed Station Only:
22.
Remove the harness hole plate [C] (1 screw).
23. Fix the tray harness with the nylon clamp
[D].
1-23