Accessory Counter Installation - Ricoh FT556 Service Manual

ACCESSORY COUNTER INSTALLATION

1. Remove the front cover [A] (1 knob screw).
2. Pull out the fusing unit [B] about half way.
3. Remove the front
screws); this cover should be removed from
the top first.
4. Remove the accessory counter cover plate
[D] (2 screws).
5. Push the accessory counter [E] into the
space provided until it locks.
6. Connect the 2P connector [F] on the acces-
sory counter to the counter harness [G].
7. Reinstall all covers.
inner cover [C] (5
31 March 1987
1-37