Ricoh FT556 Service Manual page 44

36. Put five sheets of white paper (A3 or 11" x
17") on the exposure glass.
37. Lower the platen cover.
38. Plug in the machine and turn on the main
switch.
39. After pressing the Clear Modes Key, the
Clear/Stop Key, and the Recall/Enter Key in
that order, enter 10 using the Number Keys.
Press the Recall/Enter Key again.
40. After the warm up period is completed,
press the Start key for drum conditioning.
41. After the machine stops, turn off the main
switch.
42. Install the operating instruction cards [A]
over the Dip switch cover as shown (two-
sided tape).
43. Install the original holder [B] on the platen
cover as shown and install the receiving
tray [C].
44. Load paper into the cassette and check
machine operation and copy quality.
Fill out the New Equipment Condition Report.
43.
31 March 1987
1-33