Ricoh FT556 Service Manual page 66

5. Install the interface board [A] on the PCB
plate (2 screws, 1 connector).
6. Remove the sorter covers [B] (2 screws
each).
7. Remove the shipping retainers [C] (2
screws each).
8. Mount the sorter on the copier. Insert the
two mounting studs [D] into the docking
holes [E], and pass the harness [F] through
the access hole [G].
9. Fix the sorter unit to the copier (front) with
the knob screw [H].
10. Connect the sorter adapter harness [I] to
the sorter (Free white 2P connector).
(non duplex machines only)
1-55