Paper Size Sensor Replacement - Ricoh FT556 Service Manual

3. PAPER SIZE SENSOR REPLACEMENT

1. Perform steps 1 to 8 of the tray down
sensor and positioning switch replacement
procedure (preceding procedure).
2. Remove the front guide post [A] (1 screw
and 1 hook).
3. Remove the paper size sensor bracket [B]
(1 screw).
4. Replace the paper size sensor [C] (1 screw
and 1 connector).
NOTE: When installing the sensor bracket,
make sure that the sensor harness [D]
is positioned inside the sensor bracket.
3-55