Ricoh FT556 Service Manual page 29

31 March 1987
2. Remove the rear expansion unit cover [A]
(2 screws).
3. Remove the front [B] and rear [C] right
covers of the expansion unit (front: 2
screws, rear: 1 screw).
4. Remove the right side safety switch as-
sembly [D] (1 screw).
5. Disconnect the expansion interface harness
from the expansion unit.
6. Pull out the 3rd paper feed unit [E] from the
expansion unit (4 screws).
7. Remove the 3rd paper feed PCB
(1 screw).
8. Refer to the common procedure
capacity tray installation.
1-18
assembly
for large