Cassette Modification - Ricoh FT556 Service Manual

CASSETTE MODIFICATION

1. Take off the cassette cover [A].
2. Remove the side fences [B] (1 screw each)
and the bottom plate [C].
3. Reposition the rear fence [D] in the desired
paper size position (1 screw).
Paper size positions are shown on the
inside of the cassette.
4. Reinstall the bottom plate.
5. Reinstall the side fences in the desired
paper size position.
6. Attach the proper paper size decals [E] on
the cassette at the positions shown.
7. Insert the actuator plate [F] in the slot on
the front of the cassette as shown.
1-34