Auto Id Sensor Adjustment - Ricoh FT556 Service Manual

31 March '87

2. AUTO ID SENSOR ADJUSTMENT

ADJUSTMENT STANDARD: +3 ± 0.06 volts
1. Perform the lamp intensity adjustment be-
fore performing the auto ID sensor adjust-
ment.
2. Remove the rear cover (3 screws).
3. Turn off the main switch.
4. Remove the DIP switch cover [A] on the
left side of the operation panel and turn on
DIP SW 201-8.
5. Turn on the main switch.
6. Place 2 sheets of A3 (11" x 17") paper on
the exposure glass.
7. Press "5", "6" and "#" in that order and
wait for the copier to warm up.
8. Select the auto ID setting.
3-26