Ricoh FT556 Service Manual page 85

31 March 1987
k) Continue to repeat steps 'i)' and 'j)' un-
til you achieve the same registration
as in step 'b)'.
Turn off the copier main switch and set
22.
DIP SW101 as follows:
ON: 101-1, -3
OFF: 101-2, -4
23. Move the ARDF stoppers [A] to the ends
as shown and tighten the allen screws.
24. Reinstall the copier and ARDF covers.
When reinstalling the ARDF cover,
make sure that the belt holders [B] do
not ride on the ribs [C] of the ARDF
cover.
Check the operation of the ARDF and
25.
copier system.
Fill out the New Equipment Condition
26.
Report.
1-74