Ricoh FT556 Service Manual page 61

31 March 1987
10. Connect the sorter ac harness [A] (Free
red 2P connector).
11.
Connect the sorter dc harness [B] (CN804,
free white 4P connector).
12. Secure the sorter ground wire [C] (1
screw).
13. Turn on DIP SW801-3 on the interface
board [D].
14. Mount the sorter covers and copier rear
cover.
15.
Peel off the panel cover [E] at the left end
of the operation panel [F].
16. Insert the Sort/Stack key top (copier acces-
sory [G]) and stick down the Sort/Stack
key cover (copier accessory [H]).
17. Check the sorter's operation and fill out the
New Equipment Condition Report.
1-50